If you’ve got an AT&T Samsung Galaxy S2 in your hands, then you’re going to want to check for the latest software update that’s available for it through Samsung Kies. That’s because Samsung has just started rolling out the proper Android 4.0.4 software upgrade for it, letting users go from Android 4.0 to something that’s a little higher up in the Galaxy S2 software line.
Samsung first released the Android 4.0 Ice Cream Sandwich software upgrade for the AT&T Galaxy S2 earlier this year and had an official software rollout all throughout the summer. This new update brings it to 4.0.4, and although it’s no Jelly Bean, it’s still quite useful. It adds a number of new features that, to most users of modern smartphones, are sorely needed.
It’s worth noting that this software upgrade only applies to units of the original Samsung Galaxy S2 a.k.a. SGH-i777. So if you have a Galaxy S2 Skyrocket or anything of the sort, tough luck. Feel free to use Samsung Kies to download and install this software upgrade otherwise.
- Update Galaxy S2 I9100G to Android 4.1.2 DDLS3 Jelly Bean firmware. Samsung already released the Android 4.1.2 based Jelly bean firmware for the international Galaxy S2 I9100 smartphone. Users of its Galaxy S2 variant GT-I9100G were eagerly waiting for the Android 4.1.2 Jelly Bean update.
- 1 Before you start. This guide will show you how to update your Galaxy to the latest software version. Updates give you access to new improvements and fixes bugs on your phone.
- The AT&T Samsung Galaxy S2 can now be upgraded to Android 4.0.4 through Samsung Kies, the desktop-based Android software upgrade program from Samsung.
The Galaxy S2 I9100 can now be updated to the latest Android 4.4.2 KitKat firmware, thanks to the release of CyanogenMod 11 (CM11) based EHNDROIX V ROM by XDA senior member, AlessandroXCV.
Black panther 2018 bluray download. There is some great news for Galaxy S3 (GT-I9300) owners as industrious XDA Senior member, arter97, has ported the most-awaited official Android 4.4.4 KitKat update for Samsung's ageing smartphone. Samsung Galaxy S II I9100 The Galaxy S II is Samsung's successor to the bestselling Galaxy S smart phone. With features such as being ultra-thin, a high quality rear camera, and HSPA+ Radio, the Galaxy S II was a hit with consumers.
EHNDROIX V is an aftermarket firmware released by NitroX developers with focus on minute details of customisation to deliver a user-friendly KitKat experience together with support for a wide range of terminals.
As the ROM is based on the original Android Open Source Project (AOSP) release, it brings stock-like KitKat features on a custom ROM with a completely bloatware-free experience.
Some of the noteworthy features ported into EHNDROIX V custom ROM are listed below:
- Android 4.4.2 KitKat with FluidUI 4.5
- Based on latest CyanogenMod 11 build
- Update the ROM directly from your device using OTA
- Official bootanimation
- Nova Launcher
- Fully customizable quick settings
- Esclusive Google apps called Ehndrogapps
- Tweaks designed for a very smooth system experience and better battery life
- No more ads in the apps
- Option to disable root for more security
- Send messages with exclusive Ehndroix app with a very attractive look, fully customisable and with new features
- Exceptional audio quality and volume thanks to Sony xLoud and ClearAudio
- Striking images quality thanks to Sony Bravia Engine 2 and a better density
- Fantastic official Ehndroix wallpapers
- Perfect working GPS in all countries due to the automatic fix satellites
- ROM in constant development (keep up to date thanks to date version)
- Keep safe your data with Titanium Backup installed by default
Interested users can follow our step-by-step guide to install Android 4.4.2 KitKat on Galaxy S2 I9100 using CM11 based EHNDROIX V ROM. IBTimes UK reminds its readers that it will not be held liable for any device damage during or after firmware installation. Users are advised to proceed at their own risk.
Pre-requisites
Samsung Galaxy S2 Update 4.4 Kitkat Download
- The CyanogenMod 11 based EHNDROIX V ROM and the instructions given in this guide are meant for the Galaxy S2 I9100 model only. Verify device model number by navigating to Settings > About Phone.
- Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup.
- Verify correct USB drivers for the phone are installed on the computer (download Galaxy S2 I9100 USB drivers).
- Ensure USB debugging mode is enabled on the phone, by navigating to Settings > Developer Options (NOTE: Tap the phone’s Build Number seven times to unlock or reveal the hidden Developer Options under Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
- Make sure the phone has at least 80% battery charge t o prevent unexpected device shutdown (due to battery drain) while installing the ROM.
- Ensure the device is unlocked (not locked to a specific carrier) and rooted with latest ClockworkMod (CWM) Recovery (v6.0.4.5) or install CyanogenMod 10.2 Nightly which includes CWM recovery v6.0.4.5.
- If the device is stuck at booting or experiencing boot loop issues, perform Wipe Cache Partition and Wipe Dalvik Cache a few more times before rebooting.
- Allow newly installed ROM to stabilise for five minutes before you start working on it.
Downloads Required
- Google Apps (if this does not work, try Google Apps Full)
Steps to Install Android 4.4.2 KitKat on Galaxy S2 I9100 with CyanogenMod 11 Based EHNDROIX V ROM
Step-1: Download Android 4.4.2 KitKat EHNDROIX V ROM for Galaxy S2 I9100 to computer
Step-2: Download Google Apps package
Step-3: Connect the Galaxy S2 to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of the phone’s SD card.
Samsung Galaxy S2 Update 4.4
Step-4: Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
Step-5: Press and hold Volume Up, Home and Power buttons together, until the Galaxy S2 logo appears on screen.
Step-6: Release all three buttons at the same time to boot into recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
Step-7: Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action.
Step-8: Return to CWM recovery main menu and select Mounts and Storage > Format System and click Yes on next screen to confirm. Then perform Wipe Cache Partition. From the main menu of CWM recovery, go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
NOTE:Flash CyanogenMod 10.2 Nightly Cheetah burner. before you proceed (use step 9). Once CM 10.2 Nightly is flashed, you will have access to CWM recovery v6.0.4.5 and then you can install/flash CyanogenMod 11 ROM (repeat step 9).
Step-9:Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the EHNDROIX V ROM filewhich you copied earlier to your phone’s SD card. Choose Yes on next screen to confirm the firmware installation.
Step-10: Repeat the previous step to install Google Apps as well.
Step-11: Once Google Apps is also installed, select “+++++Go Back+++++” and reboot the phone by tapping reboot system now from the recovery menu. Your Galaxy S2 I9100 will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.
Your Galaxy S2 I9100 is now running on Android 4.4 KitKat via CyanogenMod 11 based EHNDROIX V ROM. Go to Settings > About Phone to verify the firmware installed.
Samsung Galaxy S2
[Source: XDA]